Modell SET-ASM
|
The AccuSense™ Model ASM is a high performance pressure transducer designed for industrial applications requiring high accuracy. The all stainless steel construction, groove design, and hydrophobic porous plug protect the recessed air vent from contaminents in industrial environments. The patented resonant variable capacitance sensor is laser welded, providing high accuracy and stability.
The electronics platform enables outstanding performance over environmental temperature ranges.
As part of the AccuSense™ product family, Model ASM’s zero and span settings are securely set through use of SecureCal™ accessory making for secure and stable calibration settings. Excellent stability, and secure calibration makes it ideal for high performance industrial, laboratory, and test cell applications.
Spezifikationen | |||
---|---|---|---|
Performance Data | |||
Zero Offset Position Effect | <0.05%/G (Ranges =100 psi) <0.1%/G (Ranges =50 psi) | ||
Long-term Stability | <0.10% FS/Year, Typical | ||
Response Time to Pressure Input (From 100% to 10% of pressure range) | <10 ms for Voltage Output <80 ms for Current Output | ||
Factory Calibration | In Vertical Position (pressure port downward) | ||
Environmental Data | |||
Temperature Calibrated | -20 to +60°C | ||
Operating Temperature | -40 to +85°C | ||
Storage Temperature | -40 to +85°C | ||
Vibration | 10g from 1 kHz to 2kHz | ||
Pressure Media | Gases or liquids compatible with 17-4 pH stainless steel. Note: Hydrogen not recommended for use with 17-4 PH stainless steel. | ||
Electrical Data | |||
Excitation Range | 9 to 30VDC (5VDC & 4-20 mA output), 15 to 30VDC (10VDC output) | ||
Current Consumption | <23 mA (5VDC & 10VDC Versions) | ||
Warm-up, Environmental | Within ±0.02% FS after 15 min warm-up time | ||
Miswiring | Reverse Excitation Protection | ||
Signal Output Ranges | 0 to 5 VDC, 0 to 10VDC (4-wire), 4-20mA (2-wire) | ||
Physical Description | |||
Electrical Terminations | 6-Conductor Cable, Pigtail; 6-Pin Bayonet Connector | ||
Dimensions | See Spec Sheet | ||
Moisture/Splash Resistance | IP65, NEMA 4X | ||
Weight | 254 g | ||
Pressure Fittings | See Spec Sheet | ||
Case Materials | Stainless Steel | ||
Sensor Description | |||
Wetted Materials | 17-4 PH Stainless Steel | ||
Life Cycle Rating | >1.000.000 Pressure Cycles |
Hinweise | |||
---|---|---|---|
[1] | Higher or lower limits available (consult factory). |