Navigation

Modell ONS-RX3003-00-01899 €
zzgl. MwSt.

  • HOBO Remote Monitoring Station Data Logger
  • Flexible support for a broad range of sensors
  • LCD display for easy field deployment
  • Cloud-based data access
  • Plug-and-play operation
  • Alarm notifications via text, email
  • Rugged double-weatherproof enclosure
  • Cellular version
  • Optional Analog Input and Relay Modules
dem Merkzettel hinzufügen

The HOBO RX3000 Remote Monitoring Station provides continuous logging for a broad range of energy and weather monitoring applications with up to ten smart sensors and optional relay and analog sensor modules. Data from the RX3000 station is transferred at regular connection intervals to HOBOlink® web-based software where you can check the latest conditions, view graphs, configure sensors and alarms, download your data, or schedule data delivery via email or FTP. Inside its weatherproof enclosure, this durable station has a built-in LCD screen to check the current system configuration and status, start and stop logging, add and remove smart sensors, and connect to HOBOlink on demand. Up to three individual relays can be activated on the optional relay module while the optional analog module has four analog inputs that support excitation power, scaling, and statistics measurements. Both of these easy-to-install modules can be configured with HOBOlink.


Spezifikationen
Station
Operating Range-40° to 60°C; no remote communications for battery voltage less than 3.9 V DC
Smart Sensor Connectors10
Smart Sensor Network Cable Length100 m maximum
Smart Sensor Data ChannelsMaximum of 15 (some smart sensors use more than one data channel; see sensor manual for details)
Module Slots2
Logging Rate1 minute to 18 hours
Time Accuracy±8 seconds per month in 0° to 40°C range;
±30 seconds per month in -40° to 60°C range
Battery Type/Power Source4 Volt, 10 AHr, rechargeable sealed lead-acid;
external power required using one of these options:
AC power adapter (AC-U30), solar panel (SOLAR-xW), or external power source 5 V DC to 17 V DC with external DC power cable (CABLE-RX-PWR)
Rechargeable Battery Service LifeTypical 3-5 years when operated in the temperature range -20° to 40°C;
operation outside this range will reduce the battery service life
Memory32 MB, 2 million measurements, continuous logging
Alarm Notification LatencyLogging interval plus 2-4 minutes, typical
Enclosure AccessHinged door secured by two latches with eyelets for use with user-supplied padlocks
LCDLCD is visible from 0° to 50°C (32° to 122°F);
the LCD may react slowly or go blank in temperatures outside this range
MaterialsOuter enclosure: Polycarbonate/PBT blend with stainless steel hinge pins and brass inserts;
Inner enclosure: Polycarbonate; Gaskets: Silicone rubber;
Cable channel: EPDM rubber; Cable opening cover:Aluminum with ABS plastic thumb screws;
U-Bolts: Steel with zincdichromate finish
Size18.6 x 18.1 x 11.8 cm
Weight2.2 kg
Mounting3.8 cm mast or wall mount
Environmental RatingWeatherproof enclosure, NEMA 4X (requires proper installation of cable channel system)
Cellular
Wireless RadioGSM/GPRS/EDGE: Quad band 850/900/1800/1900 MHz,
UMTS/HSPA+: Five band 800/850/900/1900/2100 MHz
AntennaPenta band
Optional Analog Sensor Module (RXMOD-A1)
Input ChannelsFour, single-ended, in addition to smart sensor data channels
Measurement Range and Accuracy0-25.6 mA DC, ±5 µA ±0.15% of reading
0-2.5 V DC, ±0.25 mV ±0.2% of reading
0-5 V DC, ±0.25 mV ±0.2% of reading
0-10 V DC, ±0.3 mV ±0.2% of reading
0-20 V DC, ±0.6 mV ±0.2% of reading
0-33 V DC, ±1.20 mV ±0.2% of reading
Resolution15 bits
Field WiringTwo- or three-wire via screw terminals, 16-24 AWG
Minimum/Maximum Input Voltage0/33 V DC
Minimum/Maximum Input Current0/25.6 mA
Minimum Source Impedance for Current Measurement20 kΩ
Excitation Voltage12 V DC ±5% at 200 mA maximum per module
Optional Relay Module (RXMOD-R1)
RelaysThree independent relays
Alarm Output RelaysEach relay contact closure can be configured as normally open, normally closed, or pulsed
Voltage30 V max
Current1 Amp max

HOBO RX3000 Remote Monitoring Station

Datenlogger > Datensammler und Software
ModellBeschreibungEinsetzbar mit
ONS-BHW
  • Software HoboWare 3.0 für Windows/MAC
  • kostenlose Einstiegsversion
  • Allen Onset-Datenloggern außer Serien U20, U24, U26
ONS-BHW-PRO-CD
  • Software HoboWare Pro 3.0 für Windows/MAC
  • inkl. USB-Verbindungskabel
  • Allen Onset-Datenloggern

Datenlogger > Sensoren für Datenlogger
ModellMess-/Überwachungs­größeMess-/Über­wachungs­bereichKabellänge
ONS-S-TMB-M002
  • Temperatur
  • -40 … 75 °C
  • 2 m
ONS-S-TMB-M006
  • Temperatur
  • -40 … 75 °C
  • 6 m
ONS-S-THB-M002
  • Temperatur
  • relative Luftfeuchtigkeit
  • -40 … 75 °C
  • 0 … 100 %
  • 2,5 m
ONS-S-THB-M008
  • Temperatur
  • relative Luftfeuchtigkeit
  • -40 … 75 °C
  • 0 … 100 %
  • 8 m
ONS-S-RGB-M002
  • Niederschlagsmenge
  • 0 … 12,7 cm/h
  • 2 m
ONS-S-LIA-M003
  • Photosynthetisch aktive Strahlung
  • 0 … 2.500 µmol/m²/s
  • 3 m
ONS-S-LIB-M003
  • Solarstrahlung
  • 0 … 1.280 W/m²
    (Wellenlänge 300 … 1.100 nm)
  • 3 m
ONS-S-WSET-M003
  • Windgeschwindigkeit
  • Windrichtung
  • 0 … 45 m/s
  • 0 … 355 °
  • 3 m
ONS-S-BPB-CM50
  • Luftdruck
  • 660 … 1.070 mbar
  • 50 cm
ONS-S-SMD-M005
  • Bodenfeuchte (Volumen 1 l)
  • 0 … 0,57 m³/m³
  • 5 m
ONS-S-LWA-M003
  • Blattfeuchte
  • 0 … 100 %
  • 3 m

Datenlogger > Wetterstationen und Smart-Sensoren
ModellBeschreibungMess-/Überwachungs­größeMess-/Über­wachungs­bereichDatenübertragung
ONS-RX3001-00-01
  • Wetterstation für 10 Smart-Sensoren
  • LCD-Display
  • Optional:
    Analogsensormodul, Relaismodul
  • Variabel
  • Variabel
  • Ethernet-Interface
ONS-RX3002-00-01
  • Wetterstation für 10 Smart-Sensoren
  • LCD-Display
  • Optional:
    Analogsensormodul, Relaismodul
  • Variabel
  • Variabel
  • WLAN-Interface
ONS-U30-NRC
  • Wetterstation für 5 Smart-Sensoren
  • Meteorologische Größen
    (Smart-Sensor-Eingänge)
  • Je nach Sensor
  • USB-Interface

Datenlogger > Außeneinsatz
ModellAnzahl KanäleMess-/Überwachungs­größeMess-/Über­wachungs­bereichMesswerte/Status­wechsel
ONS-H21-002
  • 4
  • Meteorologische Größen
    (Smart-Sensor-Eingänge)
  • Je nach Sensor
  • Speicher: 512 kB

Newsletter

Jetzt anmelden

Kontakt

Ansprechpartner

PCB Synotech GmbH
Porschestr. 20-30
41836 Hückelhoven
Telefon: +49 (0) 24 33/44 44 40 - 0
E-Mail: info@synotech.de

News

Alle Newsbeiträge

PCB Synotech Neuheiten

18. Juni 2018 - Neue Produkte

Produktneuheiten von PCB Synotech zusammengefasst: die Broschüre PCB Synotech Neuheiten 2018 stellt neue Beschleunigungssensoren, Mikrofone, Industrielle Vibrationssensoren, Kraft- und Drucksensoren sowie Schallpegelmesser vor.

Weiterlesen