Modell SET-730

  • Capacitance Manometer
  • Wide Compensated Operating Temperature
  • Extremely Low Noise
  • Insensitive to Environmental Changes
Angebot anfordern

Setra’s low cost, compact Model 730 is designed for Semi-conductor, Petrochemical/Pharmaceutical/Process and Industrial Vacuum Markets. The 730’s new high frequency electronics design is fully RoHS compliant and yields extremely low noise, while maintaining the fast response time required for today’s critical control applications. External noise rejecton, fast warm-up, resistance to environmental effects, and quick return to zero are unmatched by competing models costing twice as much.

The 730 employs a welded, all Inconel® wetted parts sensor for compatibility with virtually all process chemistries. This field proven, rigid mount, single electrode sensor provides high over-pressure capability and exceptional long-term stability. The tensioned diaphrag mprovides low hysteresis, high resolution, and repeatability.

The Model 730 offers 0 to 5 VDC or 0 to 10 VDC output that is linear with pressure and independent of gas composition. A wide dynamic measuring range is insured through Percent of Reading accuracy (± 0.5% standard and ±0.25% optional) and negligible temperature coefficients across its 0 to 50 degree C compensated range. Temperature coefficents of ±0.25% FS/50°C on zero and ±1.35% of Reading/50°C on span are standard.

Offered in a variety of full scale pressure ranges from 10 torr up to 1000 Torr, the Model 730 accepts 12 to 30 VDC power and can be configured with a 9 or 15 pin D-Sub or 5 pin terminal strip electrical connection, all with "plug and play" industry standard pinouts. A variety of vacuum fittings are also available.


Spezifikationen
Accuracy Data
Accuracy±0.5% of Reading
±0.25% of Reading (Optional)
[1]
ResolutionInfinite, limited only by output noise level (=0.005% FS)
Compensated Temperature Range0 to +50 °C
Thermal Zero Shift±0.25% FS/50°C[2]
Thermal Span Shift±1.35% Rdg/50°C[2]
Long Term Stability±0.5% FS/YR, excluding environmental effects[3]
Response Time<20 milliseconds
Proof Pressure45 psia
Environmental Data
Operating Temperature0 to +80°C
Storage Temperature-20 to +85°C
Shock50 g Operating
Pressure MediaGases or liquids compatible with Inconel®. Inconel® wetted material is for 0.5" tube option only. Other fitting options will add Stainless Steel.
Physical Description
CaseStainless Steel
Electrical Connection5-Pin Screw Terminal, 9 Pin D-Sub, or 15 Pin D-Sub on 6" Pigtail
Pressure FittingsSee Spec Sheet
Wetted MaterialInconel®
Cavity Volume<6.0 cm<sup>3</sup>
Weight (approx)<250 g
Electrical Data (Voltage)
Circuit3-Wire
Excitation/Output12 to 30 VDC for 0-10 VDC,
9 to 30 VDC for 0-5 VDC
[4]
Output Load>10 kohm Load
Current Consumption<10 mA Max.
Output Impedance<1 ohm
ComplianceCE Compliant (Electro Magnetic Compatibility Directive 2004/108 EC),
EU RoHS Compliant

Hinweise
[1]Includes Non-Linearity, Non-Repeatability and Hysteresis.
[2]Units calibrated at nominal 66°F. Maximum thermal error computed from this datum.
[3]±1.0% FS/yr for ranges less than 100 Torr full scale for when operated at 80°C
[4]Calibrated into a 50K ohm load, operable into a 5000 ohm load or greater.


Broschüre
Produktinformation
PDF Download - 1.133 KB

Broschüre
Operating Instructions
PDF Download - 351 KB
Newsletteranmeldung