Modell SET-ASM

  • High Accuracy: ±0.05% FS (End-Point)
  • Low Thermal Error Over Wide Temperature
  • Optional Overpressure Protection up to 10x
  • Proof Pressure
  • Compact Design (1.3&quo; Diameter)
  • Low Thermal Error
  • Secure & Simple Field Calibration
  • Rugged Stainless Steel Construction
  • Multiple Configurations Available
Angebot anfordern

The AccuSense™ Model ASM is a high performance pressure transducer designed for industrial applications requiring high accuracy. The all stainless steel construction, groove design, and hydrophobic porous plug protect the recessed air vent from contaminents in industrial environments. The patented resonant variable capacitance sensor is laser welded, providing high accuracy and stability.

The electronics platform enables outstanding performance over environmental temperature ranges.

As part of the AccuSense™ product family, Model ASM’s zero and span settings are securely set through use of SecureCal™ accessory making for secure and stable calibration settings. Excellent stability, and secure calibration makes it ideal for high performance industrial, laboratory, and test cell applications.


Spezifikationen
Performance Data
Zero Offset Position Effect<0.05%/G (Ranges =100 psi)
<0.1%/G (Ranges =50 psi)
Long-term Stability<0.10% FS/Year, Typical
Response Time to Pressure Input
(From 100% to 10% of pressure range)
<10 ms for Voltage Output
<80 ms for Current Output
Factory CalibrationIn Vertical Position (pressure port downward)
Environmental Data
Temperature Calibrated-20 to +60°C
Operating Temperature-40 to +85°C
Storage Temperature-40 to +85°C
Vibration10g from 1 kHz to 2kHz
Pressure MediaGases or liquids compatible with 17-4 pH stainless steel.
Note: Hydrogen not recommended for use with 17-4 PH stainless steel.
Electrical Data
Excitation Range9 to 30VDC (5VDC & 4-20 mA output),
15 to 30VDC (10VDC output)
Current Consumption<23 mA (5VDC & 10VDC Versions)
Warm-up, EnvironmentalWithin ±0.02% FS after 15 min warm-up time
MiswiringReverse Excitation Protection
Signal Output Ranges0 to 5 VDC, 0 to 10VDC (4-wire),
4-20mA (2-wire)
Physical Description
Electrical Terminations6-Conductor Cable, Pigtail;
6-Pin Bayonet Connector
DimensionsSee Spec Sheet
Moisture/Splash ResistanceIP65, NEMA 4X
Weight254 g
Pressure FittingsSee Spec Sheet
Case MaterialsStainless Steel
Sensor Description
Wetted Materials17-4 PH Stainless Steel
Life Cycle Rating>1.000.000 Pressure Cycles

Hinweise
[1]Higher or lower limits available (consult factory).


Broschüre
Produktinformation
PDF Download - 655 KB

Broschüre
Operating Instructions
PDF Download - 167 KB
Newsletteranmeldung